diff --git a/board/bf533-ezkit/Makefile b/board/bf533-ezkit/Makefile
index b2d7acf..6a45b7c 100644
--- a/board/bf533-ezkit/Makefile
+++ b/board/bf533-ezkit/Makefile
@@ -35,12 +35,11 @@
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
 	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
-u-boot.lds: u-boot.lds.S
-	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp
-	mv -f $@.tmp $@
+$(obj)u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
 
 clean:
 	rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf533-ezkit/config.mk b/board/bf533-ezkit/config.mk
index 9847924..c8b9fb8 100644
--- a/board/bf533-ezkit/config.mk
+++ b/board/bf533-ezkit/config.mk
@@ -26,6 +26,8 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/bf533-stamp/Makefile b/board/bf533-stamp/Makefile
index 21f6ad1..5ae0228 100644
--- a/board/bf533-stamp/Makefile
+++ b/board/bf533-stamp/Makefile
@@ -35,12 +35,11 @@
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
 	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
-u-boot.lds: u-boot.lds.S
-	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp
-	mv -f $@.tmp $@
+$(obj)u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
 
 clean:
 	rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf533-stamp/config.mk b/board/bf533-stamp/config.mk
index 9847924..c8b9fb8 100644
--- a/board/bf533-stamp/config.mk
+++ b/board/bf533-stamp/config.mk
@@ -26,6 +26,8 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile
index e5481bf..e5ef9af 100644
--- a/board/bf537-stamp/Makefile
+++ b/board/bf537-stamp/Makefile
@@ -35,12 +35,11 @@
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
 	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
-u-boot.lds: u-boot.lds.S
-	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp
-	mv -f $@.tmp $@
+$(obj)u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
 
 clean:
 	rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf537-stamp/config.mk b/board/bf537-stamp/config.mk
index d9e884e..719b97e 100644
--- a/board/bf537-stamp/config.mk
+++ b/board/bf537-stamp/config.mk
@@ -26,6 +26,8 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8
 LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6
diff --git a/board/bf561-ezkit/Makefile b/board/bf561-ezkit/Makefile
index a1a4433..e7ee243 100644
--- a/board/bf561-ezkit/Makefile
+++ b/board/bf561-ezkit/Makefile
@@ -35,12 +35,11 @@
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS) u-boot.lds
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS) $(obj)u-boot.lds
 	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
-u-boot.lds: u-boot.lds.S
-	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P -Ubfin $^ > $@.tmp
-	mv -f $@.tmp $@
+$(obj)u-boot.lds: u-boot.lds.S
+	$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ -P $^ > $@
 
 clean:
 	rm -f $(SOBJS) $(OBJS)
diff --git a/board/bf561-ezkit/config.mk b/board/bf561-ezkit/config.mk
index 77c888b..710809a 100644
--- a/board/bf561-ezkit/config.mk
+++ b/board/bf561-ezkit/config.mk
@@ -26,6 +26,8 @@
 # This is not actually used for Blackfin boards so do not change it
 #TEXT_BASE = do-not-use-me
 
+LDSCRIPT = $(obj)board/$(BOARDDIR)/u-boot.lds
+
 # Set some default LDR flags based on boot mode.
 LDR_FLAGS-BFIN_BOOT_PARA := --bits 16
 LDR_FLAGS += $(LDR_FLAGS-$(CONFIG_BFIN_BOOT_MODE))